MIXERS
|
 |
Technical Characteristics:
• high-speed mixers applicable to tanks of volume 200÷500 l;
• securing flange for tanks made of polycarbonate (AF) and aluminum (AC);
• shafts and screws of conical type coated with polypropylene (AF) and stainless steel (AC);
• standard voltage: 230/400V 50 Hz ~3 phase; 230V 50 Hz ~1 phase.
|
|
|
more » |
| |
. |
TANKS
|
 |
Technical Characteristics:
• polyethylene tanks;
• there is a special place on the tank for the installation of a horizontal diaphragm dosing pump or a mixer (except for 60 l tanks) ;
• standard versions: 60, 108, 230, 315, 530 and 1040 l;
• polypropylene support for installing either a mixer or a dosing pump on a tank. |
|
|
more » |
| |
. |
HOLDERS
|
 |
Technical Characteristics:
• immersible holders;
• IN-LINE holders;
• OFF-LINE flowing holders;
• multi-cell. |
|
|
more » |
| |
. |
ACCESSORY KIT
|
 |
Technical Characteristics:
• flowing kits (by-pass) connection of pH, Rx, multi-cell electrodes;
• standard kits for inlet/outlet of chemical agents applicable to pumps with different flow rate. |
|
|
more » |
| |
. |
FOOT FILTERS
|
|
Technical Characteristics:
• chemical foot filters for peristaltic and diaphragm dosing pumps that feature flow rate up to 80 l/h;
• filter construction materials: polypropylene, stainless steel. |
|
|
more » |
| |
. |
INJECTION VALVE
|
|
|
Technical Characteristics:
Standard injection valves are made of PP, PTFE, PVC, and stainless steel; they are applicable to pumps with different flow rates; applicable to injection of chemical agents into the system.
|
|
|
more » |
| |
. |
STD VALVES
|
|
|
Technical Characteristics:
• valves supplied together with the standard list of equipment for dosing pumps;
• fixing valves for dosing pumps with flow rate up to 30 l/h;
• ball valves for pumps with flow rate of 50÷80 l/h. |
|
|
more » |
| |
. |
ADD VALVES
|
|
|
Technical Characteristics:
• valves supplied upon additional request;
• ball valves made of stainless steel and borosilicate glass for pumps with different flow rates;
• spring-loaded inlet/outlet valves for pumps with flow rate up to 20 l/h;
• Karlez valves. |
|
|
more » |
| |
. |
STD PUMP HEAD
|
 |
Technical Characteristics:
• polypropylene standard pump heads (PP);
• pumps heads equipped with manual type air bleeding valves made of polypropylene (PP);
• PVC standard pump head;
• specially designed plexiglass pump head for viscous liquids. |
|
|
more » |
| |
. |
ADD PUMP HEAD
|
 |
Technical Characteristics:
• dosing pump heads supplied upon additional request;
• pump heads equipped with automatic air bleeding valve applicable to pumps that feature different flow rates;
• stainless steel pump head;
• Teflon pump head;
• PVDF pump head. |
|
|
more » |
| |
. |
OTHER ACCESSORIES
|
 |
Technical Characteristics:
• solutions for sensor calibration;
• hose;
• pressure reducing valves;
• accumulators;
• air bleeding valve;
• fitting |
|
|
more » |
