Home

 

  Dosing pumps for water treatment

 

Etatron logo

 

hr

ETATRON-UKRAINA is a representative office of Italian manufacturer of ETATRON D.S. dosing equipment in Ukraine.

The company designs and manufactures a wide range of pumps and control units that address most chemical dosing and monitoring applications.
ETATRON D.S. is certified
for CE and ISO 9001 marking, is CSA and UL approved, and has obtained GOST R Certificate of Conformity as well as the sanitary and epidemiological certificates (hygiene certificates).

New dosing equipment

ST-D-AA Membrane dosing pumps
Buffer solutions DLX(B)-MA/AD Dosing pumps BH3-V Peristaltic pump

 ST-D-AA Membrane dosing pumps

Buffer solutions

DLX(B)-MA/AD Dosing pumps

BH3-V

 

hr

hr

hr

hr

• Pump head —AISI 316L.
• Membrane —AISI 316L.
• Die-cast aluminum housing protected by epoxy/ anti-acid paint ;
• Protection rating: IP55, isolation class: F - S1 – IEC 34-1;
• Flow rate is achieved by by operation of a dial control to adjust the stroke length rate from 10%-100%;
• Standard motors are “TEFC”, 3 phase: 0.18; 1400 rpm, flange B14
• Buffer solutions  PH4, PH7, PH9;
• Conductivity buffer solutions CD 147 / 1413 / 12880 μS/CD.
• Analog diaphragm dosing pump with manual control.
• Constant  ON / OFF mode dosing.
• Dual scale of performance control 0-100% and 0-20%.
• Four LEDs display the status of the work.
• 4 touch buttons: START, STOP, 0-20% mode, the mode of 0-100%.
• Handle the potentiometer to adjust the performance.
• Without the support of the level sensor.
• Peristaltic pump with increased productivity.
• Flow rate control 0-100%.
• Pump flow rate  is adjustable.
• Universal input voltage 90-260V.
• hoses made from: Santoprene® (standard), on request: Silicone, Tygon-LFL, Norprene®.
• hose clamps made from: AISI.

hr

ETATRON Equipment

Solenoid metering pumps

Diaphragm dosing pumps

Piston dosing pumps

Solenoid metering pumps
Diaphragm dosing pumps
Piston dosing pumps

Controllers

Peristaltic pumps

Control and regulation system

Controllers
Peristaltic pumps
Control and regulation system
 

 Advantages of ETATRON

  • high reliability;
  • efficiency;
  • the best price / quality ratio;
  • stable operation;
  • ease of management and programming;
  • analog / microprocessor control;
  • various installation options;
  • versatility;
  • wide range of applications.
Scope of the dosing pumps:

Because of theirs simplicity, efficiency and relatively small cost, ETATRON metering pumps have use in the many   industry chemical processes: water treatment, wastewater treatment, disinfection of water in swimming pools and water parks, agriculture, chemical, paint, textile, food processing, beer, drinks, etc.

more >>


Украина

ООО "ETATRON-UKRAINA"

Tel.: +38 0362-67-17-71
Tel.: +38 0362-67-10-20

Mob.: +38 067-360-85-22
Mob.: +38 050-304-53-80

e-mailtov.etatron@ukr.net

ETATRON D.S. logo

СООО "BTS-ENGINEERING-Bel"

Mob.: +375 17 2075862
Mob.: +375 17 2075976
Mob.: +375 29 3801442
Mob.: +375 29 7485375

e-mailbtsoffice.bel@gmail.com

Республика Беларусь
 
© ETATRON D.S. 2004-2024
All rights reserved.